Rigid Arm Float Switch : low level water protection.

Application : Protects the pump from low level water.

These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

The unit offers a reliable solution for basic fluid regulation, preventing overfilling, dry runs or loss of liquid. It's mounted internally through a port in the side of your container, which makes it ideal for applications where there's no top or bottom access to the tank.

• Suitable for use in both NO (normally open) and NC (normally closed) positions
• Silicone gasket for thermal stability and corrosion resistance in demanding applications
• Wide operating temperature range of -20°C to +100°C for use in harsh industrial settings

This switch is straightforward to install. Fit the gasket onto the float switch thread, then feed the connecting lead and the threaded portion of the float switch through the hole in the container from the inside. Feed the fixing nut over the connecting lead and tighten the nut until secure. Must close level is 8mm, must open level is 20mm (SG=1).

Option to include a control box and plug - N2052KIT - which provides terminal connections for outside control ie alarm or solenoid.

Useful Downloads

 View Data Sheet
  product specification, available for download