GRP Sectional Break Tanks : pre-insulated.

Application : This tank range offers cost effective water storage in a variety of capacities and footprints.

Sectional tanks can be built either rectangular, square or to any special shape or size such as L shaped Tanks to suit conditions. They can be assembled to a wide range of capacities from 1000 litres to 2.19 million litres with internal partitions if required. Features pre-insulated panels, U valves, CFC free foam, completely waterproof, will not corrode for longer life, normal fittings can be used, lightweight and extremely strong, hygienic, environmentally friendly and complies to the latest Byelaw regulations.

Three flanged options are available:

• Internally Flanged Base (IFB): IFB Tanks need adequate space to the sides of the installation to allow the fixing of the panels from outside the tank but where a headroom restriction may be present. The base panels are fastened together from inside the Tank itself with the Tank being installed on a flat and level base. The final base support system must be flat and level and strong enough to support the weight of the Tank when full without any movement .
• Externally Flanged Base (EFB): EFB Tanks are to be installed where there is adequate access to the base and sides of the Tank to allow for the installation from outside the Tank. They can be fully drained quickly and without pumps. A clearance space of a minimum of 500mm is required on all sides and there must be sufficient headroom above the Tank for opening the man-way cover. The base fixings are only accessible from the underside of the Tank, and must be raised on Concrete Piers/Goalposts or a combination of one of these and RSJs.
• Totally Internally Flanged (TIF): TIF Tanks have been designed to suit applications where maximum water capacity is required but where Tank room space is limited. TIF Tanks have the same benefits as any other sectional Tank but allow the engineers to install from within the Tank. As a result, this allows for smaller spaced Tank rooms or enclosures. TIF tanks require a minimum of 50mm working clearance to three sides and a minimum of 500mm to the final side of the tank, a minimum of 500mm above the man-way height and or 350mm above any raised float valve housing.

Onsite assembly by the manufacturer engineers is included.

Please ensure there is sufficient access through doors and rooms to site the tank. It is important to leave sufficient room around the tanks for maintenance purposes.

Please note the available model options and ensure the correct model is chosen prior to purchase. The units are made to order and cannot be cancelled or returned once the order has been placed. To ensure suitability for your application, please call our technical team on 01793 820142.

Our Services

• Bespoke Specification : Not seeing the capacity or dimensions you need? We offer a bespoke specification service on break tanks, designed to suit your application.

Useful Downloads

 View Data Sheet
  product specification, available for download