Boiler Condensate Set : removal of condensate.

Application : Suitable for all applications where the removal of condensate fluid is not possible by gravity.

Designed for condensate from gas and oil condensing boilers (max heating capacity 200kW) with a pH value of 2.7 and higher, air conditioning systems, cooling and refrigeration systems, air dehumidifiers and evaporators.

The kit comprises an acid-resistant tank, a pump which drains the condensate into a pressure hose and a control which starts and stops the pump, light indicator showing the status of the unit and an alarm relay if there is a problem. Fittings kit included, with non-return valve.

Baffles inside the tank creates waves and the corresponding cycling of the unit caused by the inflow of liquid. To prevent blockage of the pump, a tank sump is integrated into the tank in which dirt particles can accumulate. The tank can be easily cleaned and flushed if necessary. A second fill opening at the top can accommodate the drain hose from the boiler pressure relief valve.

At the bottom of the tank is a very efficient spherical motor pump with permanent magnet rotor. It’s power consumption is only a fraction of that of comparable conventional condensate removal pumps. The electrical part of the pump is splash water protected and completely enclosed. It operates very quietly with special bearing design to maintain low noise over life span.

Innovative spherical motor design, energy efficient with a very low noise level and trouble free operation.

For sizing advice, please contact our office for assistance.

Useful Downloads

 View Data Sheet
  product specification, available for download